Knowledge Center · Recalls, Warranty & Manufacturer Audits
An AED can look perfectly healthy while important information about its safety, maintenance history, and remaining service life is unknown.
Walk into almost any school, college, office building, manufacturing facility, or municipal building, and you may find an automated external defibrillator (AED) mounted inside a familiar white metal cabinet.
The AED may have been there for years. Its readiness indicator may be green. Its battery may have an expiration date several years into the future.
Everything appears fine.
But is it?
Has the manufacturer issued a recall affecting that particular AED? Are there outstanding field corrective actions? Is the battery approaching the end of its installed service life, despite a later expiration date printed on the battery? Are the electrode pads part of a manufacturing lot affected by a safety notice?
And perhaps most importantly, does the AED really need to be replaced simply because its warranty has expired?
These questions illustrate an important distinction between owning an AED and properly managing one.
At AED Service America, we believe responsible AED management begins with understanding the complete health and history of the equipment—not simply looking for a green readiness indicator.
That philosophy has shaped our maintenance and management procedures through approximately two decades of AED-related experience.
Before AED Service America assumes responsibility for maintaining an existing AED deployment, we begin with what we call an AED Health Checkup.
This is a manufacturer audit designed to establish important information about each device before routine maintenance begins.
We identify the AED’s manufacturer, model, and serial number and contact the manufacturer’s technical support department.
We ask specific questions:
Our objective is to understand what the manufacturer knows about the equipment before we begin managing it.
The importance of this process became especially clear when AED Service America began working with a college that had 14 AEDs deployed across its campus.
Our review revealed that all 14 AEDs were subject to a manufacturer recall and should have been removed from service years earlier.
The college had AEDs. The devices were physically present. But the organization did not have a complete understanding of the safety history associated with its equipment.
That experience reinforces a lesson every AED owner should understand:
An AED can be hanging on the wall, appearing perfectly normal, while being subject to an unresolved manufacturer safety action.
A visual inspection alone may not reveal that information.
The manufacturer’s Health Checkup helps us identify concerns that could otherwise go unnoticed.
One of the most valuable outcomes of a manufacturer’s Health Checkup is discovering that an AED can appropriately remain in service beyond its warranty period.
Many organizations mistakenly assume that when an AED’s warranty expires, the device must be replaced.
That is not necessarily true.
A warranty generally describes the manufacturer’s obligations to repair or replace equipment under certain conditions. It does not automatically determine the last date an AED may be used.
Depending on the model, its condition, available replacement components, manufacturer support, and applicable safety information, an AED may remain suitable for service after its warranty expires.
AED Service America’s primary focus is onsite AED maintenance and management.
Although we also sell AEDs, our business is built around helping organizations maintain their existing equipment.
That creates an important distinction in how we approach replacement recommendations.
Our objective is not to replace every AED when its warranty expires. Our objective is to determine whether the device can safely and appropriately remain in service.
We sometimes tell clients:
“If you have money you’d like to spend replacing your AEDs, we’ll certainly help you do that. But if your existing devices can safely remain in service, there may be no reason to replace them simply because their warranties have expired.”
When the manufacturer’s information supports continued use, and the AED meets applicable inspection and maintenance requirements, we help the client maintain the equipment rather than recommend an unnecessary capital expenditure.
When replacement is justified by a recall, an unsupported device, unavailable supplies, or another legitimate concern, we explain the reason.
The recommendation should follow the condition and status of the equipment—not a sales target.
Consider an organization with AEDs deployed across dozens of facilities.
Replacing an entire deployment solely because the warranties have expired could cost a substantial amount of money.
If the equipment remains appropriate for continued service, that expenditure may be unnecessary.
We believe helping a client avoid an unnecessary purchase can be just as valuable as helping them make a necessary one.
This is one of the ways AED Service America works to earn trust.
Another commonly misunderstood aspect of AED ownership involves battery expiration dates.
Many AED owners look at the date printed on a battery and assume it tells them how long the battery will operate inside their AED.
That assumption can be misleading.
There is an important difference between a battery’s printed shelf-life or expiration date and its expected functional life after installation in an AED.
Consider an AED that uses Duracell batteries.
A battery may carry a printed expiration date approximately ten years into the future. Yet the AED manufacturer may specify an installed service life of only five years for that battery in the particular device.
For that specific AED model, AED Service America proactively replaces the batteries after four years of installed service.
Why replace them early?
Because our objective is not to extract every possible month of battery life.
Our objective is to reduce the likelihood of an avoidable battery-related problem.
A battery can have years remaining before its printed expiration date while already approaching the end of its recommended service life inside an AED.
For AEDs with installation-based battery replacement intervals, the installation date is one of the most important pieces of information to document.
Without it, an organization may not know how long the battery has been powering the device.
That is why AED Service America uses battery labels identifying two critical dates:
This provides a visible reference for future inspections and helps prevent decisions based solely on a distant printed expiration date.
The installation date does not, by itself, measure remaining electrical capacity. Battery condition, manufacturer instructions, device diagnostics, and any applicable use-by dates must also be considered.
Nevertheless, documenting the installation date is essential to properly managing batteries whose service life is measured from installation.
AED self-tests are important, but their capabilities vary by manufacturer and model.
Some devices provide detailed battery information. Others offer more limited information about installation history or remaining service life.
A normal readiness indicator should not be used as a substitute for understanding the battery’s age and replacement requirements.
At AED Service America, we don’t want to guess how long a battery has been installed. We want that information documented.
Expiration dates tell us when supplies need attention.
Installation dates tell us how long certain batteries have been in service.
But there is another piece of information that AED Service America considers essential to effective component management:
Manufacturing lot numbers.
A lot number identifies a particular production batch of a product.
AED batteries and electrode pads may be manufactured by specialized suppliers, including third-party companies. If a manufacturing concern affects a particular batch, a manufacturer recall or corrective action may identify specific lot numbers.
An organization that tracks only expiration dates may have no convenient way to determine which of its AEDs contain affected components.
Imagine a manufacturer announces that a particular production lot of electrode pads may be defective.
An organization with AEDs in multiple states may know when its pads expire, but not which locations received the affected lot.
Without lot-number records, identifying the affected supplies could require physically examining AEDs at every location.
AED Service America takes a different approach.
By documenting component lot numbers where available, we can compare a manufacturer notice against our recorded inventory.
This helps us identify:
The same principle applies to other manufacturer identifiers, including model numbers and serial numbers, depending on the scope of the notice.
We don’t simply want to know when a component expires. We want to know what component is installed, where it is located, and whether it may be affected by a safety notice.
This level of traceability requires additional documentation and administrative effort.
We consider it a worthwhile investment.
While battery replacement schedules can depend heavily on installation dates, electrode pads have their own expiration requirements.
AED electrode pads contain materials designed to maintain appropriate electrical contact with a patient’s skin.
Over time, those materials can deteriorate.
Depending on the manufacturer and product, electrode pads commonly have shelf lives of approximately two years, while certain products may have longer labeled expiration periods.
A responsible AED program should document pad expiration dates, verify packaging condition, confirm device compatibility, and arrange timely replacement.
The fact that an AED appears ready does not necessarily establish that its pads are within their expiration date.
For this reason, AED Service America considers electrode pad management an essential part of professional AED maintenance.
The environment in which an AED is stored can also affect its readiness.
AEDs may be located in climate-controlled offices, manufacturing facilities, warehouses, vehicles, outdoor cabinets, or buildings that experience significant temperature changes.
Manufacturers establish operating and storage temperature limits for their devices and supplies.
Those limits vary by model.
Excessive heat, freezing temperatures, moisture, and other environmental conditions may affect equipment performance or component longevity.
A complete AED management program should therefore evaluate the conditions in which equipment is deployed.
An AED that is appropriate for an indoor office may require additional environmental protection when installed outdoors.
Proper equipment selection, placement, and maintenance must all be considered together.
Not every AED maintenance procedure is expressly required by law, regulation, or manufacturer instructions.
However, AED Service America believes that minimum requirements should be the starting point— not necessarily the endpoint—of a responsible AED management program.
Our experience has led us to adopt additional procedures that we consider best practices.
These include conducting manufacturer audits before onboarding an AED deployment, documenting battery installation dates, establishing proactive replacement schedules where appropriate, recording component lot numbers, and maintaining detailed equipment histories.
We also emphasize device-specific inspection procedures, accurate documentation, and follow-up.
Educational disclaimer: AED maintenance requirements, self-test capabilities, replacement intervals, and storage limits vary by manufacturer and model. Always follow current manufacturer instructions, applicable safety notices, and relevant legal requirements.
Keep Reading

Understand AED ownership, maintenance, inspections, recalls and the importance of keeping equipment Response-Ready.
Read article
Understand AED battery service life, installation dates, proactive replacement and manufacturer-specific requirements.
Read article
Learn how AED warranty expiration differs from service life and when an AED may need replacement.
Read articleAED Service America provides nationwide onsite AED maintenance and management, including comprehensive inspections, manufacturer audits, battery and electrode pad management, recall monitoring and ongoing program oversight.
Phone: 860-970-3250
Email: support@aedserviceamerica.com